(1) According to the metal plate type or the gap between the joints, the width of the joint, and the engineering design requirements, select the specifications and sizes.
(2) Wipe clean the joints of the metal plates.
(3) Start with one end of the metal plate, slowly open the double-sided tape and stick the sealing tape in a straight line along the seam.
At the overlap of the lower metal plate, gently press the tape with your hand to make it adhere firmly to the metal.
(4) Tear off the release paper on the butyl tape, press the upper metal plate of the interface into the joint, after bonding
Squeeze the joints in order to make the joints tightly bonded and tightly closed.
(5) Fix the screws and tighten them to make the upper and lower adhesive surfaces of the tape adhere tightly.
