In 1800, the British astronomer William Herschel (W.Herschel) discovered that there is an invisible "ray with the greatest heating power" outside the red band of the visible spectrum refracted by a glass prism, followed by the French physicist Berklain call this radiation infrared radiation
Radiation is an inherent property of objects, and all objects above absolute zero will emit infrared radiation. Infrared radiation is an electromagnetic spectrum with a wavelength of 0.75~1000μm, which has both wave and particle properties. It follows both the wave law and the quantum law, and can be absorbed and emitted by infrared radiation materials.
In recent years, infrared radiation heat transfer technology has developed rapidly, and the intensification of the world energy crisis has promoted its rise in the civilian field. The key to strengthening radiation heat transfer technology lies in the selection of high-infrared radiation materials. At present, infrared radiation ceramic materials are one of the most commonly used infrared radiation materials due to their excellent chemical stability, high temperature stability and excellent infrared radiation properties.
1. Infrared radiation generation mechanism
Infrared radiation originates from changes in the internal motion state of the molecules, atoms or ions that make up the material. Quantum theoretical studies have shown that the essence of matter absorbing and emitting infrared light is the result of the interaction between the change of molecular dipole moment and the oscillating electric field of light. Relevant studies have shown that short-wave radiation is closely related to electronic transitions, while long-wave radiation mainly depends on the vibration characteristics of the lattice. According to the principle of symmetry: the lower the symmetry of the particle vibration, the greater the change of the dipole moment, and the stronger its infrared radiation performance.
Most of the infrared radiation ceramic materials are macromolecular substances composed of polyatoms. The polyion system easily changes the symmetry of the molecule during the vibration process and changes the dipole moment, which promotes the absorption and emission of infrared rays. The infrared radiation characteristics of materials are closely related to the crystal structure, lattice defects and impurities contained in the materials. Therefore, adjusting the lattice vibration frequency, distorting the lattice and chemical doping are the keys to improving the infrared radiation properties of materials.
Second, the classification of infrared radiation ceramics
The current research on high infrared emissivity ceramic materials mainly includes the following systems: cordierite system, spinel system, perovskite system, magnetoplumbite system, etc.
1. Cordierite system
The cordierite material has become the focus of research due to its small thermal expansion coefficient, good thermal stability, and excellent infrared radiation properties. It has a silicate structure with a ring structure and is a hexagonal crystal system. Its basic unit is composed of six-membered rings composed of five [SiO4] and one [AlO4]. The rings are connected by [MgO6] octahedron and [AlO4]. A cavity enclosed by a ring.
2. Spinel system
The spinel crystal belongs to the cubic crystal system, the chemical formula is AB2O4, and the crystal structure is shown in the figure below. A represents divalent metal ions, such as Mg2+, Mn2+, Zn2+, etc.; B represents trivalent metal ions, such as Al3+, Cr3+, Fe3+, etc. Each spinel unit cell has 64 tetrahedral voids and 32 octahedral voids. These voids are easy to be replaced or filled by other metal ions, which can realize the diffusion of metal ions and doping modification. The infrared radiation properties of the system materials provide favorable conditions.
3. Perovskite system
The molecular formula of the perovskite compound is ABO3, and the crystal structure is shown in the figure. The A site is a rare earth or alkaline earth metal ion, which usually plays a role in stabilizing the structure; the B site is a transition metal ion. The metal ions are replaced to form anion defects or B-site ions of different valence states, thereby enhancing the absorption of free carriers and lattice vibration absorption, so that the infrared radiation performance of the material system can be enhanced. At present, the most studied materials are LaCrO3 and LaMnO3.
4. Hexaluminate system
The molecular formula of hexaaluminate compound is MAl12O19, and the crystal structure of magnetoplumbite is shown in the figure. M is an alkaline earth metal (except Ba2+) or a rare earth metal, which is formed by alternate stacking of alumina spinel structural units that are mirror images of each other and mirror layers formed by M ions. Each unit cell contains two spinel stacks and Two crystal planes, each spinel stack contains 64 tetrahedral voids and 32 octahedral voids, of which 4 Al3+ occupy tetrahedral voids and 8 Al3+ occupy octahedral voids, which can be introduced by doping. The transition metal ions replace Al3+ in the tetrahedral and octahedral voids, so that it exists stably in its lattice structure, which can form abundant lattice defects, thereby enhancing the infrared radiation performance. At present, the typical material that has been reported is lanthanum hexaaluminate.
Third, the application of infrared ceramic materials
At present, the application of infrared ceramic materials is increasingly widespread, whether it is in the traditional drying and heating fields, or in the fields of medical care, environmental protection building materials, aerospace, and electrical and thermal conductivity materials, there is no lack of its existence.
1. Infrared drying and heating
①Renovation of heating equipment: The application of high radiation infrared ceramic materials in the field of heating and energy saving is one of the leading directions of its development. In the high temperature stage above 800 °C, the heat transfer is mainly based on radiation heat transfer. Brushing high radiation infrared paint on the inner wall of industrial heating equipment will effectively improve the heat transfer process, improve the heat transfer efficiency of the heating equipment, and effectively improve the energy utilization rate, which is one of the effective energy-saving methods. Ceramic materials also have the advantages of high temperature resistance, oxidation resistance, corrosion resistance, etc. At the same time, they can achieve the purpose of protecting the equipment and make the equipment have a longer service life.
②Manufacture of infrared baking and drying equipment: Infrared is a part of electromagnetic waves, which can effectively transfer heat in air or vacuum. Infrared baking and drying have high heat transfer efficiency and no pollution. To a certain extent, it can achieve simultaneous heating inside and outside the material. , Faster baking and drying with less energy dissipation. Manufactured with high radiation infrared ceramic materials or made by mixing metal powder with high radiation ceramic powder, the investment in metal infrared baking and drying equipment can bring considerable economic benefits and good social value.
2. Antibacterial material
Zr, Mn, Fe, Co, Ni and their oxides are added to the ceramic raw materials and fired into porcelain, which can emit far-infrared rays with a wavelength of 8-18 μm at room temperature. The infrared radiation in this band can directly penetrate the cell wall, and the thermal effect generated can effectively destroy the metabolism and growth and reproduction of the bacteria, thereby having a bactericidal function. Preserving vegetables, fruits, juices, etc. in packages or containers containing far-infrared ceramic materials can play a role in preserving freshness and inhibiting bacteria, preventing food from spoilage.
3. Healthcare
Infrared radiation can be subdivided into near-infrared (0.76~2.5μm) and far-infrared (2.5~1000μm) according to wavelength, of which far-infrared radiation with a wavelength of 9~11μm is easily absorbed by human skin, and far-infrared radiation with a wavelength of 10~16μm. The frequency is consistent with the natural vibration frequency of the peptide chain of the organic functional group of the human body.
When the far-infrared rays of the corresponding wavelength radiate to the human body, it can promote blood circulation, enhance the exchange of substances in the blood, and at the same time promote the production of enzymes needed by the human body, enhance the body's immunity and the ability of somatic tissue regeneration. Infrared radiation can directly penetrate the cell wall, and the toxins secreted by the bacteria are easily destroyed in this environment, which can effectively destroy the metabolism of the bacteria and inhibit its growth and reproduction. Therefore, high-radiation far-infrared ceramic materials are often used for infrared physiotherapy on the human body.
4. Building materials
Architectural ceramics have the characteristics of high strength, corrosion resistance, elegant appearance, and are widely used in home life. Adding a small amount of rare earth and a trace amount of transition metal oxides to the ceramics or glazes combined with cordierite and mullite can prepare building ceramic materials with infrared radiation properties at room temperature. Using this material for interior decoration can be used at room temperature. It emits infrared rays, which can effectively activate indoor air, purify the living environment of human beings, and play an antibacterial and health-care effect on the human body. It is an excellent environment-friendly building material.
5. Fuel activation
In recent years, the pollution of the atmospheric environment by industrial waste gas and automobile exhaust gas has become increasingly serious, and air purification treatment has been strengthened all over the world. The research shows that the normal temperature infrared ceramic is used as the fuel activator, which is connected to the oil circuit close to the internal combustion engine, and the infrared rays radiated at normal temperature are used to activate the fuel molecules, improve the internal energy of the fuel molecules, and increase the power performance, so as to save fuel and reduce fuel consumption. The purpose of emission of toxic gases such as CO and H2S in the exhaust gas is not only to purify the air, but also to improve the thermal efficiency of the fuel.
Epilogue
At present, infrared radiation ceramic materials have received more and more attention, and their applications have also been extended to people's daily life. However, with the subsequent development of infrared radiation ceramic materials in three aspects: nanometerization, composite composition and performance diversification, it is believed that it will have more potential to be tapped.





