Introduces the factors that affect the curing time of high temperature tape: temperature, glue type, quantity, pipe diameter, humidity and wind speed. Any of the above conditions will have an impact on the curing time of the high-temperature tape.
Temperature: The higher the ambient temperature, the faster the curing speed; The lower the ambient temperature, the slower the curing rate.
Glue Category: Quick-formula high-temperature tape cures faster than slow-formula high-temperature tape. Due to the high volatility, low viscosity high temperature tapes will cure faster in a short period of time than high viscosity high temperature tapes.
Amount of use: Excessive use of high-temperature tape at room temperature will require longer volatilization times and slow down its curing rate. Too much high-temperature tape increases its permeability and can damage the integrity of the joint.
Pipe diameter: The larger the pipe diameter, the greater the gap between the pipe and the interface. In the same pipe, the slow high viscosity high temperature tape used in 8 pipes will require a longer curing time compared to the low viscosity glue used in 1 pipe. This is because the diameter of the pipe increases and the voids also increase, which requires more high temperature tape to fill. These gaps.
Humidity: The higher the humidity, the slower it is, because too many macrosocimatic molecules slow down the volatilization of the high temperature band at the interface.
Wind speed: When the wind speed of the bonded part reaches or exceeds 10 MPH, the acceleration of the volatilization speed will lead to the acceleration of curing. Dryness and high temperatures are the main factors.
The above are the factors that affect the curing time of high-temperature tape. The length of curing time of high-temperature tape does not reflect the quality of high-temperature tape, but it has a lot to do with the environment in which you use it.





