Construction regulations of butyl tape
1. General
(1) This regulation applies to the sealing and waterproofing works of civil structure roofing and metal plate surface using Senping butyl tape as waterproofing membrane bonding, metal pressing plate bonding, PC board bonding and other supporting materials.
(2) When designing or using the tape, it should be carried out in accordance with the relevant regulations or with reference to the use standards of Zhonghao butyl tape.
2. General provisions
(1) Construction should be carried out in the temperature range of -15°C—45°C (when the temperature exceeds the specified temperature range, corresponding measures should be taken)
(2) The surface of the base must be cleaned or wiped clean, kept dry and free of floating soil and oil.
(3) The bond should not be torn or peeled off within 24 hours after construction.
(4) According to the actual project needs, choose different types and sizes of butyl tape.
(5) Place the boxes at a distance of about 10cm from the ground, and do not stack more than 5 boxes.
3. Construction tools
Cleaning tools, scissors, presses, wallpaper knives, etc.
4. Requirements for use
(1) The bonding base surface is clean and free of oil, grey water and water vapor.
(2) In order to ensure the bonding strength, the base surface temperature is above 5°C, and special low-temperature environments can be specially produced.
(3) When using, peel back the tape for a circle before using it.
(4) Do not use it at the same time with waterproof materials containing organic substances such as stupid, methyl alcohol, methanol, ethylene, and silica gel.
5. Process characteristics
(1) The construction is convenient and quick. The construction with butyl tape should be bonded in place at one time, and the surface of the base layer should be clean.
(2) The construction environment requirements are wide. The ambient temperature is -15°C-45°C, and the humidity is below 80°C, which can be used normally, and has strong environmental adaptability.
(3) The repair process is simple and reliable. Just use single-sided butyl tape for large leaks.





