There are a variety of shapes of butyl sealant tape: because it has a certain shape and size specifications, can be fast, accurate and clean installation; Tape does not need to be mixed before installation, unlimited storage time; Once installed, immediately sealing, no need for vulcanization or solvent volatilization, no need to worry about collapse; Tape installation does not require special equipment and technology; Adhesive tape can be used in harsh environmental conditions for a long time, can replace other sealing materials, in the range of -55℃~95℃ sealing tape and normal work; Because of its flexibility and compressibility, sealing tape can maintain a continuous uninterrupted (uninterrupted) seal.
1. Application of butyl tape in automobile manufacturing industry
The performance requirements of butyl tape in different applications are different, even in the same car, the performance of butyl tape for different parts is different.
Butyl tape has not only good sealing, adhesion and damping, but also easy to use, and has been widely used in the automotive manufacturing industry.
2. Adhesive door waterproof film for automobile assembly
There are many kinds of adhesives for automotive interior decoration, such as common neoprene adhesive, acrylic pressure sensitive adhesive, polyurethane adhesive, butyl adhesive and adhesive tape. Butyl sealing tape is mainly used for pasting ceiling interior decoration materials, door waterproof film, car door panels, interior decoration materials, etc. Door panel waterproof film adhesive tape is extruded by butadiene rubber adhesive molding. It has strong adhesion to the paint surface of steel plate and waterproof film. Because of its strong adhesion to paint surface of steel plate and waterproof film, it has been widely used in automobile industry.
Butyl tape is a kind of non-dry pressure sensitive adhesive, its function is the same as double-sided pressure sensitive adhesive, most of the disc packaging, with isolation paper in the middle, the length can be cut at will. When assembling a door, put a sealed waterproof film under the window. If you do not have a molded sealed waterproof film, you can use ordinary plastic paper (cut according to the boundary size of the inner plate stamping groove) instead. When pasting, a circle of butt tape should be continuously pasted on the inner panel of the door, and then the sealing isolation film should be pasted on the dense surface, and then the inner panel should be assembled to prevent rainwater from infiltrating into the door.
Butyl bands on car Windows
Butyl tape has excellent bonding and sealing properties, and it was the first process used by an American automaker to bond a windshield to butyl tape. It requires that the arc of the glass window closely match the window frame. The width and thickness of the tape can be selected according to the specifications of the window frame, and the length can be arbitrarily cut in the construction process.
Window glass and butyl adhesive tape bonding process is relatively simple, first use solvents (such as gasoline, acetone, etc.) to remove the oil and dust on the edge of the window frame and windshield, and then intercept and paste butyl tape on the window frame according to the required length, and then install the windshield on the belt. The fixture can be tightened when a certain amount of pressure is applied to it.





