Jan 02, 2023 Leave a message

A brief history of adhesive tape

In 1600 BC, the ancient Egyptians applied broad beans, barley, milk fat, bone glue and other sticky substances to linen cloth to apply to wounds, which can be considered to be the original state of today's rubber paste. In ancient Greece, olive oil and lead dan were mixed to make a stick shape, called Dayakilon hard paste, heated on a thick substrate, and could be used immediately. Later, in order to increase its viscosity, pine resin, beeswax, etc. were added. These are the initial types of pressure-sensitive adhesives, and this is how adhesive tape comes in.

In 1870, the Johnson brothers (Johnson & Johnson) in the United States began to make rubber rubber green with pressure-sensitive adhesive properties at room temperature such as pine resin and plant-based fillers. This is where modern adhesive tape begins. Subsequently, the German pharmacist Beiersdorf (Beiersdorf) in 18S2, in order to reduce the irritation of rubber paste to the skin and prevent inflammation, the zinc oxide that neutralizes resin acid was added to the rubber paste to make an early zinc oxide rubber paste.

In the twenties, electrical insulating adhesive tape, commonly known as black tape, was invented. In the thirties, the United States (Mr. Drew) invented cellophane adhesive tape. Then came the masking tape for painting.

In the twentieth century, especially after the Second World War, new polymer materials have emerged one after another, and the world has entered the era of polymer chemistry. The development of synthetic rubber and synthetic resin began to prevail in the United States. Products such as rubber paste and industrial adhesive tapes are finally using these new materials, improving product quality. The emergence of new materials can also be said to be a challenge to the quality of rubber paste that does not irritate the skin and has excellent aging resistance. Therefore, for the zinc oxide rubber paste has a big problem of irritating the skin, many new materials have begun to be developed.

Such as, esterified rosin, hydrogenated rosin, etc. The emergence of these two types of rosin resin is because rosin resin uses rosin acid as the skeleton, in order to improve the compatibility of rosin and rubber, rosin esterification into esterified rosin; In order to improve its aging resistance, its unsaturated double bonds are hydrogenated to become hydrogenated rosin. In this way, the quality of adhesive tape is improved, so that the adhesive tape industry has developed by leaps and bounds.

On the other hand, polyisobutylene with good aging resistance has been developed for elastomers for pressure-sensitive adhesives. However, it also has the disadvantages of cold flow, for which many "modification" research works have been carried out. For example, vulcanized grease, white oil, etc. are added to polyisobutylene. In addition, there is polyethylene isobutyl ether, which is an excellent material for pressure-sensitive adhesives as resin-based elastomer applications for pressure-sensitive adhesives. In addition, single-component pressure-sensitive adhesive one-acrylic pressure-sensitive adhesive, pressure-sensitive adhesive softener-one-polybutene, etc. These polymer materials play a certain role in improving the quality of pressure-sensitive adhesives and reducing the irritation of rubber paste to the skin.

The application of new materials in pressure-sensitive adhesives, although reducing the incidence of allergic dermatitis, is impossible to completely prevent dermatitis caused by irritation. Since I860 (Dr. Golden) invented the non-woven fabric to make ventilation rubber paste, the rubber paste has further reduced the irritation to the skin, and at the same time it has been successfully used for cecum surgery. Therefore, ventilatory rubber paste and ventilatory adhesive tape are also rapidly developed.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry